For 2ft, 2ft 6in, 3ft 6in, 4ft, 5ft, 5ft 6in & 6ft round tables

Round Tablecloth Size Guide & Examples

Find your round table size, compare tablecloth diameters and check the drop all around the table. This guide also includes typical seating, worked 5ft and 6ft round-table examples and a simple size formula.

Important: a 60" round tablecloth does not fit a 6ft round table.

A 6ft round table is 72" / 183cm in diameter 60" / 152cm round tablecloth is smaller than the table top. For a 6ft round table, start with an 88" / 224cm round tablecloth for a short drop, then consider 108", 118" or 130" depending on the finished look you want.

How to Choose a Round Tablecloth Size

Measure the diameter of the table top straight across the centre, then decide how far you would like the tablecloth to drop below the table edge.

1. Measure the Diameter Measure straight across the centre of the table top from edge to edge.
2. Choose Your Drop Decide how far you would like the tablecloth to extend below the table edge.
3. Compare the Sizes Use the quick-reference guide and full drop chart below.
For reference: standard table height is approximately 75cm (29.5"). A drop close to the height of the table will normally create a near-floor appearance.

Round Tablecloth Visual Size & Drop Guide

Compare common round table sizes, typical seating, useful round tablecloth diameters and finished drops at a glance. The detailed HTML tables below provide the same sizing information in an easy-to-read format.

Round tablecloth size guide showing common round table sizes, seating capacity, tablecloth sizes and drop examples
Round tablecloth sizing reference showing table diameters, typical seating, useful tablecloth sizes and approximate drops. Always measure your table before ordering.

Tap the image to open the full-size guide.

Round Table Size, Seating & Tablecloth Reference

Use this table for a quick answer based on common round table sizes. The lower end of each seating range is usually more comfortable; chair width, place settings and centrepieces can reduce capacity.

On mobile: swipe the table left and right to see all columns.

Common round table sizes, typical seating and useful round tablecloth sizes.
Typical Seating Round Table Diameter Useful Tablecloth Sizes
Approx. 2 guests 2ft
24" / 61cm
60" / 152cm – 18" drop
70" / 178cm – 23" drop
Approx. 2–3 guests 2ft 6in
30" / 76cm
60" / 152cm – 15" drop
70" / 178cm – 20" drop
88" / 224cm – 29" near-floor drop
Approx. 4–5 guests 3ft 6in
42" / 107cm
60" / 152cm – 9" drop
70" / 178cm – 14" drop
88" / 224cm – 23" drop
Approx. 4–6 guests 4ft
48" / 122cm
70" / 178cm – 11" drop
88" / 224cm – 20" drop
108" / 274cm – 30" near-floor drop
Approx. 8–10 guests 5ft
60" / 152cm
88" / 224cm – 14" drop
108" / 274cm – 24" drop
118" / 300cm – 29" near-floor drop
Approx. 8–10 guests 5ft 6in
66" / 168cm
88" / 224cm – 11" drop
108" / 274cm – 21" drop
118" / 300cm – 26" drop
Approx. 10–12 guests 6ft
72" / 183cm
88" / 224cm – 8" drop
108" / 274cm – 18" drop
118" / 300cm – 23" drop
130" / 330cm – 29" near-floor drop

Seating capacities are approximate. The finished seating capacity depends on chair width, place settings, table-leg design, centrepieces and the amount of space you want to give each guest.

Full Round Tablecloth Size & Drop Chart

Find your table diameter in the left-hand column, then follow the row across to compare all six round tablecloth sizes. Each suitable option shows the approximate drop all around the table.

On mobile: swipe the chart left and right to compare all tablecloth sizes.

Approximate round tablecloth drop for common table diameters.
Find Your Table Size
Table Top Diameter
Tablecloth Size
Ø 152cm
(60")
Tablecloth Size
Ø 178cm
(70")
Tablecloth Size
Ø 224cm
(88")
Tablecloth Size
Ø 274cm
(108")
Tablecloth Size
Ø 300cm
(118")
Tablecloth Size
Ø 330cm
(130")
2ft 24" / 61cm 18" Drop Down The Table 23" Drop Down The Table Too Large Too Large Too Large Too Large
2ft 6in 30" / 76cm 15" Drop Down The Table 20" Drop Down The Table 29" Drop Down The Table Too Large Too Large Too Large
3ft 6in 42" / 107cm 9" Drop Down The Table 14" Drop Down The Table 23" Drop Down The Table Too Large Too Large Too Large
4ft 48" / 122cm 6" Drop Down The Table 11" Drop Down The Table 20" Drop Down The Table 30" Drop Down The Table Too Large Too Large
5ft 60" / 152cm No Drop 5" Drop Down The Table 14" Drop Down The Table 24" Drop Down The Table 29" Drop Down The Table Too Large
5ft 6in 66" / 168cm Too Small 2" Drop Down The Table 11" Drop Down The Table 21" Drop Down The Table 26" Drop Down The Table Too Large
6ft 72" / 183cm Too Small Too Small 8" Drop Down The Table 18" Drop Down The Table 23" Drop Down The Table 29" Drop Down The Table

Drop is measured from the table edge to the bottom of the tablecloth. Measurements are approximate. Always measure your table before ordering.

What Size Tablecloth Do I Need for a 6ft Round Table?

A 6ft round table measures approximately 72" / 183cm across the table top. A 60" or 70" round tablecloth is too small. These four tablecloth sizes give useful finished drops depending on the look you want.

Short Drop

  • Tablecloth: 88" / 224cm
  • Drop: 8" / approx. 20cm

Medium Drop

  • Tablecloth: 108" / 274cm
  • Drop: 18" / approx. 46cm

Fuller Drop

  • Tablecloth: 118" / 300cm
  • Drop: 23" / approx. 58cm

Near-Floor Drop

  • Tablecloth: 130" / 330cm
  • Drop: 29" / approx. 73.5cm

What Size Tablecloth Do I Need for a 5ft Round Table?

A 5ft round table measures approximately 60" / 152cm in diameter. The 60" round tablecloth is the same size as the table top and therefore gives no drop below the table edge.

Very Short Drop

  • Tablecloth: 70" / 178cm
  • Drop: 5" / approx. 13cm

Practical Drop

  • Tablecloth: 88" / 224cm
  • Drop: 14" / approx. 36cm

Fuller Drop

  • Tablecloth: 108" / 274cm
  • Drop: 24" / approx. 61cm

Near-Floor Drop

  • Tablecloth: 118" / 300cm
  • Drop: 29" / approx. 74cm

How to Calculate a Round Tablecloth Size

Measure the table-top diameter, then add your chosen drop twice: once for each side of the table.

Round Tablecloth Diameter Table diameter + drop + drop = required tablecloth diameter

Example: 6ft Round Table With a 29" Drop

72" table diameter + 29" drop + 29" drop = 130" round tablecloth.

Standard tablecloth sizes will not always exactly match your calculated measurement, so compare the nearest available size and check the resulting drop in the chart above.

Frequently Asked Questions About Round Tablecloth Sizes

Is a 60" round tablecloth suitable for a 6ft round table?

No. A 6ft round table is 72" / 183cm in diameter, so a 60" / 152cm round tablecloth is smaller than the table top. An 88" round tablecloth gives approximately an 8" drop, while larger round tablecloth sizes give progressively longer drops.

What size tablecloth gives a floor-length drop on a 6ft round table?

A 130" / 330cm round tablecloth gives approximately a 29" / 73.5cm drop on a 72" / 183cm round table, which is close to floor length on a standard-height table.

How many people can sit at a 5ft round table?

A 5ft / 60" round table commonly seats around 8 guests comfortably, with up to about 10 depending on chair width, place settings and the amount of space required for each guest.

How many people can sit at a 6ft round table?

A 6ft / 72" round table commonly seats around 10 guests comfortably, with up to about 12 depending on chair width, place settings, centrepieces and the event layout.

How do I measure a round table for a tablecloth?

Measure straight across the centre of the table top from one edge to the other. This measurement is the table diameter. Then choose the drop you want and add that drop twice to the diameter.

How far should a round tablecloth hang over the edge?

Around 8–12" / 20–30cm gives a practical shorter drop for many uses. Longer drops create a fuller, more formal appearance. A drop close to the table height—usually around 29–30" / 74–76cm—gives a near-floor appearance on a standard table.

Need More Help Choosing Your Tablecloth Size?

Return to the complete Tablecloth Size Guide for square, rectangular and round tables, or view the detailed rectangular guide.

Always measure your table before ordering, as table dimensions, table height and your preferred finished drop can vary.